Kitchen cabinet hinges – Adjusting the door hinges for kitchen cabinets that do not close completely are properly aligned, but not close at all require a minor adjustment. Unfortunately, adjusting the hinges of the door of the kitchen cabinet that will not close is largely a process of trial and error. Some hinges, such as the European tuning capabilities have a hinge cabinet has standard. Search other obvious signs of obstruction before resorting to adjusting the hinges. Paintings on a hinge or objects that extend slightly beyond the cabinet frame also prevent the door from closing.
If you have kitchen cabinet hinges that look like these, you can adjust them in different ways to make your cabinet doors shut better. The doors of a new or old wardrobe can be changed. It’s easy if you take your time and adjust gradually.
- Open the cabinet door and loosen the two mounting screws that hold the hinge to the box with a Phillips screwdriver. Sometimes cabinet mounting alignment exits, causing the door are not fully closed.
- Adjust the mounting kitchen cabinet hinges so that it is flush with the front of it and re-tighten the screws. Close the cabinet door.
- Find the screw input / output if you have hinges or European “cup”. The screw input / output is the screw in the center of the cabinet frame pointing to the back of the closet. Loosen the screw with a screwdriver and pull the door away from the cabinet slightly. Tighten the screw and close the closet door.
4. Open the closet door and look for a small screw on the side of the kitchen cabinet hinges, if you have hinges oldest European screw without input / output. Loosen the screw 1/8 turn with a screwdriver and try to close the door.