Rolling Kitchen Island – The island kitchen is a way to provide extra storage and add counter space. Islands improve workflow, efficiency and add a decorative touch. There are numerous styles available to suit any kitchen and build your own will allow you to customize a design that is the size you want. Take a weekend to build and install the island, but ask the bases of the cabinet, flooring, countertop and the frame with several weeks in advance.
- Measure your floor and figure out the volume of available space for a rolling kitchen island. This will tell how many closets you can use.
- Select a layout. The islands may have two handles, which include four cabinets which has a space between pairs, or other configuration you like. Order slightly greater than its island counter.
- Attach and tighten the cabinets together. Put them in position to check the fit. Adjust as needed. Add shims to the difference between the cabinets.
- Construct a table 2 for 4 to fit the inner base of the cabinet, the bottom of the cabinet. Drill pilot holes and nail the frame to the floor. Position the cabinets over the frame, flush and put on the cabinets, then make pilot holes in both cupboards and tables. Use screws to secure the rolling kitchen island in position. If you are planning an island bearing, place the frame for the cabinet and climbers in the frame.
- Place the lining of the cabinet at the back and sides of the unfinished cabinets. Measure and cut the liner to fit before gluing and nailing it in closets. Nail the frame at the outer corner to the finish.
- Spread a thin layer of silicon on top of the cabinets and put the counter. Add the lower frame and base of the hill on a rolling kitchen island to have fixed the finish.